All You Need To Know About Types of Concrete

 All You Need To Know About Types of Concrete

Concrete is a ubiquitous building material. It is composed of water, fine aggregates, coarse and cement. It is also available in various forms such as dry premix, which is sold in the bags, and ready-mix, delivered by the truck from the batching plant. This can be quickly delivered or formed on-site as the precast beams and same structures or cut or painted.

In engineering, the it has a broader definition which includes the minerals aggregate is mixed with the binder. In this article, we will cover every type of concrete.

Ready To Mix Concrete

The ready to mix concrete is mixed partially before arriving at the project site. It is also accomplished by mixing the it at the plant and transporting the mixer truck with the rotating drums. When the job site does not have any room for mixing the it, this type is one of the best choices.

The ready-to-mix it is also remixed at the suitable properties and slump by adding water and the necessary mixtures for ensuring that the final product is precise and accurate. Since the mixture is already mixed this type of it gets settled quicker than other ones.

Self-Leveling Concrete

The self-leveling concrete is not concrete, and it is the cementations material that uses the polymers. This type is straightforward to use, but it is relatively weaker than the standard concrete. It cannot be used outdoors or to support any heavy machinery. It does not handle any harsh chemicals. Self-leveling it is considered the best for indoor surfaces, and it can also be used for underlayment or flooring.

Reinforced Concrete

The standard concrete also possesses high compressive strength but less tensile strength to handle the tensile loads in the steel columns, floors, and the horizontal beams employed as the tensile mechanism. Adding mesh and rebar into forms before placing the it also allows the steel and to enhance strength and become monolithic in tensile regions.

Pre-Stressed Concrete

The pre-stressing and reinforce methods use steel for applying the compressive load on it before and after it casting. Steel puts concrete in a permanent compression state so that the tensile loads lessen the compressive forces without allowing the materials to be in a tension state.

The pre-stressed concrete is placed around the high-quality steel strands which have tensioned in between the anchors. After the it is settled, the anchors get released, and tension strands relax after applying the compression to it . The pre-stressed it runs around strands through tubes that are placed in it . Strands get tensioned after setting the concrete.

Roller Compacted Concrete

The roller concrete acts as the stand-in. It is cheap, long-lasting, and easy to install and requires very little maintenance. As its name implies, the RCC gets spread in layers of ten-inch thick and gets compacted by using the paving rollers. The RCC is dryer than the standard it, and it is thick enough to need re-enforcing material, forms, or joints. However, it needs water to get cured, and after being lard out, the moisture is sealed over it for trapping the water inside. It is used commonly as heavy-duty pavement or industrial including the roads, military areas, and ports.


With article we have provided information on every type of concrete. If you are building a house, it will help you understand every type of it and which one is best. itplays a considerable role in a building, so it’s essential to know every one of these. For any further queries and doubts on it you can contact any reputed concreter.

Related post