Her Fix-it Guide to Toilet Repair

 Her Fix-it Guide to Toilet Repair

Imagine your home without toilets. Yes, the thought itself is enough to make you cringe. The toilet is often the most used, or should we say the most ‘misused’ fixture in the home. The importance of the toilet can only be felt at the exact point in time when something goes wrong with it. Toilet Repair Massapequa NY are a fairly easy DIY project that can be successfully completed by anyone. With just a bit of work and the tips you will find in this article, you should be able to quickly fix your toilet.

The first step in fixing a toilet is to determine the problem with the toilet. Your toilet could either be a slow moving toilet, or it could be clogged, or it could even be a running toilet. A slow moving toilet implies that you have to flush the toilet quite a number of times and the water drains away quite slowly. Slow moving toilets are often the result of clogged sewage drain pipes, and are at risk of suddenly clogging completely and overflowing. No one likes to clean up the mess an overflowing toilet creates. A running toilet is one where once you flush it, the water does not want to stop flowing into the toilet bowl. A running toilet can use up a large amount of water over a fairly short period, so it is important to get it fixed as soon as possible.

Make no difference which problem you have, you can fix it yourself. If you happen to have a clogged or slow moving toilet, then the first thing you should do is turn off water supply to the toilet. You can do this can be by turning the knob on the shut off valve to the right until the water supply stops. The valve is normally placed a few inches above the floor on the left when facing the toilet.

Now determine which the problem you have. To do this, pour a bucket of water quickly into the bowl. If it flushes slowly, the toilet has developed a clog. Clear the clog affecting your toilet by first using a plunger. If this removes the clog, then you can turn the water back on to the toilet, if it does not clear the clog, then you should try using a plumber’s snake. This tool will allow you to clear most any clog.

Once you have the clog taken care of, then you should clear the mineral deposits that tend to develop in the small holes under the rim of the toilet. This will help your toilet flush much more effectively. These holes can be cleared with a stiff bristled brush, or you can use the bent end of a coat hanger to poke the holes clear. You might also want to make use of a small mirror to see the holes that are being cleared.

Toilet Repair & Installation Rockville Centre

If your toilet is letting water into the bowl at all times, then you have a running toilet. First off, remove the toilet tank lid and sit aside out of your way. Some people like to place it in the bathtub. Next check the ball cock, which is the valve that the float is attached to. If water is coming out of the valve, you may need to replace it.

articlespostsharing

Related post