How To Cut Down Trees In A Safe And Proper Manner?

It is critical to remove trees from your property if they are damaged, dead, sick, overgrown, or in an inappropriate location. If you attempt to cut down a tree without the assistance of a professional, you may end up in danger. To protect your safety, you must plan and prepare meticulously beforehand. This article will go over every element of tree cutting and removal. However, it would be better to hire someone for tree grinding. You can find their list by searching term “tree grinding service near me” on Google.

Stump on green grass in the garden. Old tree stump in the summer park.

Precautions should be taken.

You must take specific safety precautions to secure yourself. When attempting to cut down trees on your own, you must be in good physical condition. If you are sick, exhausted, or physically incapable of cutting down trees, you should not attempt to do so. If you have no prior training or expertise with chainsaws, you should avoid trying to operate one. Before you begin, make sure you have proper protection by dressing in garments that cover all exposed skin.

Get the equipment you require.

When it comes to tree cutting, you’ll need to employ specialised equipment. Do double-check that you have all of the necessary equipment on hand. A tiny chainsaw is best suited for trees with a diameter of less than 10 inches. Medium chainsaws can be used on trees ranging in size from 10 to 18 inches in diameter. Sharpening the blade can be accomplished with oil. Check to be that you have adequate gasoline for your gas-powered chainsaw before you start cutting. Prepare a minimum of two saw blades, a mallet, and a sharp axe for this project. You should make sure that everything is easily accessible, and that it is at least 20 feet away from the base of the tree.

Before you cut a tree, you should take the time to examine it. If you have any doubts about whether or not the tree may fall on a structure, roof, or power line, you should seek professional advice. This is done to guarantee that the tree does not fall in a direction that could endanger other people or property.

Prepare the location and identify possible escape routes.

You should make certain that no one, including children and pets, is working on the tree at the same time. Choose two escape routes before the tree comes crashing down. These escape routes must be devoid of any impediments to their effectiveness. You must ensure that your escape routes are free of any impediments.

Get to work on the cutting.

To begin, cut the tree in the direction in which you want it to go down. Cut one-third of the way through the tree’s trunk while standing in a horizontal stance. After that, make a second to three-inch cut below the first one to finish the job. Afterward, raise your work to meet the first cut by turning it at an upward angle. Finally, remove the wood from the hole. The third cut (the back cut) should be made on the opposite side of the tree from where the first two cuts were made. Make a second horizontal cut into the tree, this time 2 inches higher than the first. It is not recommended that you go through the tree more than halfway. Once the saw is removed from the cut, the tree should come crashing down. You can now rapidly get out of the area by taking advantage of one of the available escape routes.

Related post