Top Reasons Why Your Garage Door Is Not Working

 Top Reasons Why Your Garage Door Is Not Working

If you have a garage, you know how useful it is. Not only does it provide an excellent space for parking your car and storing items that are not currently in use, but it also prevents the weather from damaging your vehicle and keeps neighbors from seeing what’s parked inside. In fact, having a garage can actually increase the value of your home. However, like any mechanical device, a garage door may stop working from time to time. Depending on your door type, this can be either mildly inconvenient or downright dangerous. If you find that your garage door isn’t working as it should, check out these common issues and solutions to get it back up and running again quickly.

A- Electronic Issues

First of all, make sure that any issues with your garage door aren’t due to a problem with the electronic security system. If your opener isn’t working, it might be that it is broken and not sending a signal to the door. If your remote isn’t working at all, it might be that the batteries are dead. Likewise, if the keypad isn’t working, it might be that it is broken and needs replacing. If the issue is that the door is not responding to the signal and is remaining open or closed when you want it to be open or closed, then you may have a problem with the sensors that are used to open and close the door. You might want to hire a garage door repair company in Sacramento.

B- Broken Springs

Next, a broken spring can be a common reason for a non-working garage door. Springs are what lift the door, so if one breaks, the door will stop going up and down. If you have a torsion spring, which most garage doors have, it’s a quick repair. Most spring-loaded garage doors have a lifting eye at the top. You just need to remove the spring and put in a new one. Be sure to use the correct size spring, as a too-heavy or too-light spring can be dangerous.

C- Malfunctioning Motors

If your garage door is not working because the motor is broken, you might be able to fix the issue without having to replace the entire unit. First, disconnect the power to the motor. If the door is locked in one position, it may be that the gears are not meshing correctly. To fix this, you can sand the gear teeth to create a better fit. If the door is not moving at all, there could be a clog in the line. Remove any obstructions, and the door should start moving again. If none of these fixes work, you might need to replace the motor. Keep in mind that it is very dangerous to work with electrical components.

D- Damaged Tracks

If your tracks are bent or misaligned, it may be causing your door to bind or rub against the frame. You can straighten bent tracks with a track wrench and adjust misaligned tracks with a couple of screws. If the tracks are simply corroded, you can clean them with a mild solvent. If they are deeply corroded, you’ll have to replace them.

E- Broken Doors

If your extension door is broken, you can replace it by removing the broken door and replacing it with a new one. You can also remove the hinges and replace them with new ones to fix the issue. If your sectional door has a broken hinge, you can replace the hinge with a new one. Check your manufacturer’s instructions to see how to do this correctly.

F- Overheating

If your garage door is not working because it is overheating, it may be that the motor is not cooled properly. You can remedy this issue by cleaning the motor and applying a liner, but if you notice that the motor is loose, it is best to replace it. If sensors, such as temperature and motion sensors, are not working, it may be that the circuit board is at fault. You can replace the circuit board, or, if you are handy, you can simply clean the terminals on the board to solve the problem.

G- Sticky Doors

The most common cause of sticky doors is dust and grime. All the moving parts will collect dirt over time, and eventually, it will be enough to bind the doors. To clean your garage door, make sure you have appropriate safety gear, such as goggles, gloves, and ear protection. You’ll want to wear long sleeves to keep dirt and grime off your arms. You’ll also want to protect your eyes and ears from the noise of the garage door as it moves up and down. Once you have your safety gear on, you can set to work cleaning your garage door. A soft-bristled brush will work well on most surfaces, but you can also use a vacuum with a soft brush attachment. You can also purchase a commercial garage door cleaner, but be careful not to damage the finish on your door.


If your garage door isn’t working, don’t panic. There are lots of reasons why your door could be malfunctioning, and most of them are easy to fix. The important thing is to identify the root cause of the problem as soon as possible so you can get the door back up and running again. Having a broken garage door can be extremely inconvenient, and in some cases, it can be dangerous. Before you contact a garage door repair company, make sure you troubleshoot the issue first.


Related post